Latest earth discharge rod Tenders | Government earth discharge rod Tenders

Central Government/Public Sector

CTN :45588720

07 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of pin for pull rod support pully with washer & split pin for blcs wagons as per rdso drawing no. wd-15011-s-12, alt. 5, item no.12 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8lacs ] ]

Central Government/Public Sector

CTN :45591647

23 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms melting consisting of buffer plunger with or without spindle, buffer socket, drake beam and truss bar, nut- bolt, rivets, pin, bush, small die, inner race, outer race, suspention strip, washer, door hinges, door roster, ff or rf, hb wheel, side bearer plate, yoke plate, bottom plate, sbs plate, anchor plate. hb lever, be lever, bc link, empty axle box, axle box cover, axle box housing, foot step, briddle bar, striker casting, back stopper, empty load box, main hole cover, shackle, shackle pin, screw cupling, bearing long shaft, cbc parts of coaches with undetchable nylon bush and other nylon items, shackle stone, coil spring, locking plate, shaft, operating handle, draw bar, broken coil spring up to four coil, front and rear plate, vertical support assly, main pin of cbc shank, manual uncoupling handle, wedge lock cbc parts of coaches, vertical supporting device for cbc, anti roll bar of lhb coaches, plunger, foot step, bb hanger, eq lever, bk shoe, striker casting, brake shoe head, bk.shoe key, sielent block yoke pin support plate, lashing chain, buckle, roller backing ring, spacer, distance ring, cone assly and other parts of ctrb wire supporting hook, protecting tube, silent block all type, l.s. beam, knuckle pin, knuckle plate, front and back cover of door cylinder clamp, bearing pieces, silent block all type, sab complete and sab loose part, sab rod, and all type rod released from wagons loose and attached, control rod.coupler rod, cbc rear plate, roller, cone, backing ring, spacer, distence ringsmall cut pieces of s.s., bracket, upper and lower part of control arm of lhb coaches and other ferrous melting category items, with or without minor undetachable non-ferrous attachment. [qty on approx basis). as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

Central Government/Public Sector

CTN :45593461

22 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. & u/s ferrous scrap in corroded nature such as head stock, foot steps, berth frame, engineering items such as rusted barrigaurds,ferrous pipes, grill,gate,grill,expandedmetal mesh,fabricated tool press,transformer sheets, pipes, boxes,dustbin holder,fencing scrap,bolts and nuts,false cealing patti, angles, rails adhered or separate, drum, coach cuttings, trolleys, window grills,fabricated gates,battery box in cut condition,angles, guards, dust bins, heavy nature coach parts parts in broken or full condition, pway support structures,gi sheets, pulley, frames, ferrous boxes, sign boards, roller shutters, corroded/ dinged/ damaged wagon door, zinc coated fs sheets, base plates,ms/gi sheets in full/cut/damaged/rusted/corroded/crushed condition, wagon floor sheet, coach door,sliding door of various sorts & sizes, battery boxes in cutparts,collapsible gate, punches plate/ sheet/ screen, corroded shear cutups, galvanised sheets rusted condition, roof light/tube light fitting with/without ballast, fl housing, tl patti, crushed drums, cfl frame, regulator box, ms gutter, corroded fabrication scrap, carriage fan body cover/end shield/ guard/ blade, pedestal fan guard, air brake pipes, corr. barrels/paint drums, silent block, anchor block, wires,chains,boxes,hoop iron,lamps,air filter,clips, panels, corroded gi pipes with/without valves, gi duct, ci covers/piper/joints,coach/wagon cutup parts,sheets,equalizing stay,brake anchor,round/square pipes,pipe wrench,pins, rivets, bolts, nuts, small iron pieces,heavy melting scrap,wire rope/safety rope with/without aluminium sling,box type fitting,pipes,dust bin, hood,rack,bond, hs lamp, battery charger core with iron stand or frame, iron core, fl patti & fitting of all types and sorts and sizes, fire extinguisher without cap, fan down rod, ferrous ac template, train information display system,battery tray,trough floor sheets,ferrous parts accessories released from carriage/wagon/loco rolling stocks, galvanized sheets of sorts & sizes, sand pipe,rolling shutter,gi/ms angles and channels,rails,cutmast,protectivetube, wagon/coach springs,shockabsorber, suspensionunit, equilising stay, ls beam, bolster, silent block,iron gate,clower cups,guard gril,irongrill,springs,pins, heavy melting scrap,ac duct,gi ipes,ladders and all the above items are of various sorts and sizes in full/cut/broken/damaged and with/without wooden/glass/ rubber/ fs end fittings with /without minor non ferrous attachments if any in as is where is condition. pl.no. 98090800. custodian: cdms-rsf-gsd-per. note: 1) cutting is permitted to lorry loadable size only. 2) if any non-ferrous materials found should be handed over to custodian.3) jcb/crane loading is permitted. location: arumugham yard bin a

Central Government / Public Sector

CTN :45591781

22 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - mixed scrap of heavy melting : actual lot no. 03122606 0634 pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) scrap of cond. & unserviceable rusted and corroded mixed scrap of heavy melting ms, cs, ci, gi, ss contains pipes end body pcs. horizontal levers hand brake wheels angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins foot steps cut bits side barer housings pipe pcs straps liners sheets pipe pcs pins throwers locks races collars axle box covers, air brake pipes, guard seats, ms end body pcs, ms sheets, ms cut bits, ms rod pcs, sab parts, gi wire, ms ladders, ms channels, door hangers, tool box, ms meshes, bp fp hose pipes, knuckles, crushed paint drums, grease seals, yoke support plates, sliding doors yoke pins, sheet strips, ms pipes and pcs, rubber pads, chairs, roof sheets, grease drum, auxiliary reservoirs, cone bearing, hoop iron. wedges, hyd. hoses fabricating scrap and other miscellaneous items of wagons sorts & sizes full or broken with or without attachments. location: road no.3 (single cut permitted for loading purpose only) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )

Central Government/Public Sector

CTN :44676245

22 Jun, 2026 NA

Nashik - Maharashtra

Tender For bid to ras corrigendum : tender for supply of osaero job work for manufacturing of 127 parts ref semfg857 d d -rod , lug , plate , rod , rod , terminal , bolt , bolt , lever , eye bolt , nut , bolt , eye bolt , eye bolt , eye bolt , eye bolt , lug , lug , pipe , pipe , pipe , nut , cup , bush , terminal , washer , washer , bush , flange , support , elbow , adapter , screw in pipe connection , pipe connection , flanged t-piece , flanged elbow , adapter , lever , lug , bush , bush , elbow , elbow , elbow , cross piece , adaptor , threaded elbow , bolt , flange , nut , flange , pipe connection , cross piece , valve , flange , cover , top cover , body , t-joint , angle , flange , flange , pipe connection , flange , flange , pipe connection , angle , nut , flange , body , nut , bolt , axis , flange , nut , flange , end piece , angle , carrier , carrier , stopper , pipe , nut , fitting , flange , adapter , pipe connection , flange , plug , pipe connection , flange , flange , ring , body , ring , bush , nipple , flange , flange , plate , knob , special bolt , bracket , union nut , body , support , nut , nipple , nipple , nut , ring , ring , ring , flange , nipple , elbow , flange , body , body , clamp , eye bolt , cross piece , flange , elbow , link , axis (throttle assembly) , tee-piece

State Government

CTN :45587069

02 Jul, 2026 20.00 Lacs

Etah - Uttar Pradesh

Tender For supply of safe carriage of 8.5 m long pcc , safe carriage of 11 m long pcc , safe carriage of 9 m long stp , safe carriage of 11 and 13 m long stp , safe carriage of line material , safe carriage of xlpe cable , safe carriage of 11 kv ct pt pole mounting , safe carriage of 10 and 16 kva tf , safe carriage of 25 and 63 kva tf , safe carriage of 100 kva tf , etection of 8.5 m long pcc single support , etection of 9 m long stp single support , etection of 11 and 13 m long stp single support , etection of 11 m long pcc single support , etection of 8.5 m long pcc double pole section pole , etection of 11 m long pcc double pole section pole , etection of 11 and 13 m long stp double pole with tpmo etc , laying sagging of dog conductor , laying sagging of acsr weasel conductor , laying sagging of lt xlpe cable , laying sagging of 11 kv xlpe cable , laying sagging of ab cable , fixing of stay rod , fixing of 3 phase distribution box , erection of 11 kv ct pt pole mounting unit , installation of 11 kv pilfer metering cubical , providing and fixing of suspension clamp , providing and fixing of nut bolts off size , providing and fixing of lt shackle insulator , providing and fixing of dead end clamp , providing and fixing of stone pad , providing and fixing of danger board , providing and fixing of barbed wire , providing and fixing of number plate , fixing of joint kit outdoor , fixing of joint kit indoor , mounting of 10 and 16 kva tf , mounting of 25 and 63 kva tf , mounting of 100 kva tf , earthing of pcc pole stp dt , new guarding of ht lines with gi wire , carriage of acsr dog weseal conductor scrap , carriage of line material scrap , carriage of st pole scrap * /bid number : gem/2026/b/7664537 + /dated: 17-06-2026 ' ' / bid document 1 / 30

Central Government And Public Sector

CTN :45577910

08 Jul, 2026 NA

Kaiga - Karnataka

Tender For supply of 1. cylinder liner for dlw 251 engine, dlw part no- 10124603 , 2. piston pin for dlw 251 engine, dlw part no- 10230580 , 3. piston pin sleeve for dlw 251 engine, dlw part no-10230385 , 4. snap ring, piston pin retaining for dlw 251 engine, dlw part no-15345129 , 5. bolt spl. connecting rod to cap for dlw 251 engine, dlw part no- 10140724 , 6. valve lever lock guide for dlw 251 engine, dlw part no-10210714 , 7. assy. nylon gear, gov. drive for dlw 251 engine, dlw part no-10051624 , 8. gear governor drive, camshaft drive for dlw 251 engine, dlw part no- 10241620 , 9. gear pinion for dlw 251 engine, dlw part no-10243719 , 10. key, pinion to drive gear, 5-16 inch x 5- 16x1 inch long for dlw 251 engine, dlw part no-15312185 , 11. lever eccentric adjustment for dlw 251 engine, dlw part no-10140300 , 12. eccentric with pin for dlw 251 engine, dlw part no-10051193 , 13. fuel pump cross head lifter for dlw 251 engine, dlw part no-10142745 , 14. fuel cam roller pin for dlw 251 engine, dlw part no-10216881 , 15. fulcrum pin for f.p. lifter for dlw 251 engine, dlw part no-10216959 , 16. air and exhaust push rod lifter for dlw 251 engine, dlw part no-10142757 , 17. cam roller pin, air and exhaust for dlw 251 engine, dlw part no-10216870 , 18. fulcrum pin for push rod lifter for dlw 251 engine, dlw part no-10216947 , 19. fuel pump support with cross head and lifter for dlw 251 engine, dlw part no-10050723 , 20. push rod lifter seat for dlw 251 engine, dlw part no- 10211147 , 21. spring seat for dlw 251 engine, dlw part no-10210520 , 22. spring seat lock for dlw 251 engine, dlw part no-10210477 , 23. air and exhaust valve guide for dlw 251 engine, dlw part no-10210639 , 24. valve lever assy for dlw 251 engine, dlw part no-10040079 , 25. yoke, air and exhaust valve for dlw 251 engine, dlw part no-10140323 , 26. cam roller bushing for dlw 251 engine, dlw part no-10216893 , 27. fixed bushing cross head lifter fulcrum pin for dlw 251 engine, dlw part no-10150845 , 28. bushing at fulcrum pin push rod lifter for dlw 251 engine, dlw part no-10150109 , 29. cam roller, push rod lifter for dlw 251 engine, dlw part no-10216844 , 30. retainer ring for cam roller pin for dlw 251 engine, dlw part no-15345087

Central Government And Public Sector

CTN :45593567

02 Jul, 2026 NA

Bhilai - Chhattisgarh

Tender For supply of pull rod support for under frame brake gear type boy rdso's sk-73516, alt-8, item no.11, material & specification as per drawing. [ warranty period: 30 months after the date of delivery][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45333118

23 Jun, 2026 280

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of screen , o ring , flow restrictor , flanged fitting , flange segment , pipe clamp half , sleeve , plug-in-board , cover , o ring 4x2mm , elbow , turbine wheel , integrated circuit eeprom not adjusted , spacer ring , pipe clamp half , dc solenoid , retainer , o ring , bushing , cable entry , plug-in board , o ring , plug , ring sealing a18x22 , plug in board , plug-in board , spacer sleeve , washer , flage segment , vent line , sealant , drain line , flange , techometer , o-ring , pressure plate , v -belt kit , spring retainer , cinical spr. washer , drain valve , gasket , retainer , washer , washer , mfb 1 , plug-in-board , o ring , plug-in board , o ring 32x4 , plug-in-board , modular system , measure/monitor mod , adaptor , quick-disconnect cpl , screw , screw , screw m10x30 , cover , cylinder roller bearing , plug , non return valve , plug in board inb2-01/a , plug-in board , plug , monitor screen lcd tft 19 , screw , washer , sealing ring , hex nut , sealing ring , screw-fitting union , intermediate plate , exhaust bellows , bolt hex a3c , spring , duct plate , washer (000433013000) , dial indicator , washer , bearing huosing , plug-in board , incadescent lamp minimum 10 pcs , exhaust turbocharger , flap , bracket , sleeve , valve , incandescent lamp , threaded pin , lamp t6 , 8-36v/50ma , bushing , computer hard disc 2.5 60gb not adjuste , piston ring , plug-in-board , centering element , threaded rod , retainer , threaded bushing , plug-in-board not adjusted , pipe clamp half , spacer bushing , retainer , camshaft , spring washer , belt pulley , strap , retainer , spacer bushing , grommet , support , mounting plate , pipe clamp half , bearing huosing , ring carrier , screw , o ring 100x4mm , adaptor , eprom mem5 mcu pps cps adjusted , con rod bearing size 0 0 , eprom mem5-02 a 740676 programmed , washer , elbow , plug in pipe , plug-in board rob1-01 a , elbow , sealing ring , elbow , test service unit , o-ring , drain line , o ring , vent pipe , hexagon screw , bib 1 , screw , o ring , guard plate , plug in board , base plate , nozzle element

CTN :45579106

29 Jun, 2026 NA

Kupwara - Jammu And Kashmir

Tender For supply of ms binding wire not less than 0.9mm da conforming to is 280 of 2006 , quick setting compound conforming to is 9103 of 1999 as per tech spec att , natural sand conforming tois 383 of 2016 as per tech spec att , aggre 20mm as per is 383 of 2016 and as per tech spec , aggre 40mm as per is 383 of 2016 and as per tech spec , high security weld mesh panels of size 2600 mm x 800 mm as per tech spec att , punched tape concertina coil 850 mm with 18 loops as per tech spec att , punched tape baby concertina coil including spike and handle have 56 turns with diameter of 610 mmas per tech spec att , fence post type circular hollow section length shall be 3 point 4 mtrs as per tech spec , truss support post with rail end cap type 76 mm dia with 3 mm thickness as per tech spec att , truss support post with rail end cap type rail end cap fitting of 76 mm as per tech spec att , straining y-arm for supporting top ptcc as per tech spec att , intermediate y- arm for supporting top ptcc as per tech spec att , razor running tape 2 point 5 mm dia length of each coil shall be 95 mtrs and weight of each coil shall be 9 point 2 kg as per tech spec att , omega clamp - 89 mm dia 35 mm width 3 mm thickness as per technical specification att , accessories for fitting truss support post brace band - 89 mm, 41 mm width, 4 mm thickness as per tech spec att , accessories for fitting y arm mushroom head bolt with breakable head safety nut m8 x 120 as per tech spec att , eye bolt with loop nut m8 x 100 of material ss 304 conforming to is 6911of 2026 as per tech spec att , anchor rod 10mm dia 300mm long gi rod tie with fence post as per tech spec att , tie wire 1 point4mm dia of 100mm length wire coformig as per tech spec att , flat clamps for panel connection flat conforming to is 2062 of 2011 as per tech spec att , ss 304 mushroom head bolt m8x25 sheet metal is 1730 is of 8535 - 1987 material of ss 304 as per tech spec att , high security weld mesh panels 2600 mm x 1000 mm with weight of 11 point 02 kg as per tech spec att. , punched tape concertina coil of 1050 mm with 18 loops as per tech spec att , fence post type circular hollow section length shall be 2 point 8 mtrs and weight shall be 15 point 02 kg as per tech spec att , across fence post clamp - 76 mm dia, 35mm width, 3mm thick material ms with hot dip galvanized to 350 gsm as per tech spec att , mushroom head bolt with breakable head nut m8x50 as per tech spec att , ptcc rod 10 mm dia 2 point 64 mtr long ms rod as per tech spec att , post cap as per tech spec att , brace band-76 mm 41mm width, 4mm thick material ms with hot dip galvanized to 350 gsm as per tech spec att , rail end cap of ms as per tech spec att , hog ring as per drawing. to secure ptc coil to ptc coil and also ptc coil to panels. wire dia 3mm as per tech spec att //bid details 2 / 80

Earth Discharge Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors